TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 314

no ip http secure-port Parameter port-num -- Enter the port number. This value ranges from 1 to 65535. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Set the port number of HTTPS server as 2800: Switch(config)# ip http secure-port 2800 33.7 ip http secure-protocol Description The ip http secure-protocol command is used to configure the SSL protocol version. To restore to the default SSL version, please use no ip http secure-protocol command. By default, the switch supports all the protocol versions, including SSL 3.0, TLS 1.0, TLS 1.1 and TLS 1.2. Syntax ip http secure-protocol { ssl3 | tls1 | tls11 | tls12 | all } no ip http secure-protocol Parameter ssl3 -- Select SSL Version 3.0 as the protocol for HTTPS. tls1 -- Select TLS Version 1.0 as the protocol for HTTPS. tls11 -- Select TLS Version 1.1 as the protocol for HTTPS. tls12 -- Select TLS Version 1.2 as the protocol for HTTPS. all -- Enable all the above protocols for HTTPS. The HTTPS server and client will negotiate the protocol each time. Command Mode Global Configuration Mode 293