TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 164

Syntax ipv6 mld snooping vlan-config vlan-id-list static ip interface { gigabitEthernet port-list | port-channel port-channel-list } no ipv6 mld snooping vlan-config vlan-id-list static ip interface { gigabitEthernet port-list | port-channel port-channel-list } Parameter vlan-id-list -- The ID list of the VLAN desired to modify configuration, ranging from 1 to 4094, in the format of 1-3, 5. ip --Specify the IP address of the multicast group that the hosts want to join. port-list -- The list of Ethernet ports. port-channel-list -- The ID of the port channels. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure port ports 1/0/1-3 in VLAN 2 to statically join multicast group ff80::1234:1: Switch(config)# ipv6 mld snooping vlan-config 2 static ff80::1234:1 interface gigabitEthernet 1/0/1-3 18.9 ipv6 mld snooping vlan-config (querier) Description This command is used to enable the MLD Snooping Querier feature for specific VLANs. To disable the MLD Snooping Querier feature on the VLANs, please use no ipv6 mld snooping vlan-config vlan-id-list querier command without any parameters. To restore the default values, please use no ipv6 mld snooping vlan-config vlan-id-list querier command with specified parameters. 143