TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 98

Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Specify the interval-time as 50 seconds: Switch(config)# loopback-detection interval 50 10.3 loopback-detection recovery-time Description The loopback-detection recovery-time command is used to configure the time after which the blocked port would automatically recover to normal status. Syntax loopback-detection recovery-time recovery-time Parameter recovery-time -- The time after which the blocked port would automatically recover to normal status, and the loopback detection would restart. It ranges from 2 to 1000000 seconds. By default, this value is 90. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the recovery-time as 70 seconds: Switch(config)# loopback-detection recovery-time 70 77