TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 58

Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. 4.13 controller inform-url (Only for Certain Devices) Note: Only certain devices support this command. Description If your switch and Omada SDN Controller are not located on the same subnet, the controller inform-url command is used to inform the switch of the controller's URL/IP address. To disable the feature, use the no controller inform-url command. Syntax controller inform-url { controller-url | controller-ip } no controller inform-url Parameter controller-url -- Specify the URL of Omada SDN Controller. controller-ip -- Specify the IP address of Omada SDN Controller. Command Mode Gloabal Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Inform the switch of the controller whose IP address is 192.168.1.1: Switch (config)# controller inform-url 192.168.1.1 4.14 reset Description The reset command is used to reset the switch's software. After resetting, all configuration of the switch will restore to the factory defaults and your current settings will be lost. 37