TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 114

new-mac-learned enable | disable -- Enable/Disable the new-mac-learned notification on this port. With this feature enabled, a SNMP notification is generated and sent to the network management system (NMS) when the port learns a new MAC address. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable Port Security function for port 1/0/1, select Static mode as the learn mode, and specify the maximum number of MAC addresses that can be learned on this port as 30. When the number of MAC address entries reaches 30 on this port, new entry will be dropped: Switch(config)# interface gigabitEthernet 1/0/1 Switch(config-if)# mac address-table max-mac-count max-number 30 mode static status drop 12.6 show mac address-table Description The show mac address-table command is used to display the information of all address entries. Syntax show mac address-table { dynamic | static | filtering } Parameter dynamic | static | filtering -- The type of your desired entry. By default, all the entries are displayed. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the information of all address entries: 93