TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 39

User Guidelines If the password you configured here is unencrypted and the global encryption function is enabled in service password-encryption, the password in the configuration file will be displayed in the symmetric encrypted form. If both the enable password and enable secret are defined, only the latest configured password will take effect. Example Set the super password as "admin" and unencrypted to access Privileged EXEC Mode from User EXEC Mode: Switch(config)#enable password 0 admin 2.4 enable secret Description The enable secret command is used to set a secret password, which is using an MD5 encryption algorithm, for users to access Privileged EXEC Mode from User EXEC Mode. To return to the default configuration, please use no enable secret command. This command uses the MD5 encryption. Syntax enable secret { [ 0 ] password | 5 encrypted-password } no enable secret Parameter 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password -- A string with 31 characters at most, which can contain only English letters (case-sensitive), digits and 17 kinds of special characters. The special characters are By default, it is empty. The password in the configuration file will be displayed in the MD5 encrypted form. 5 -- Indicates an MD5 encrypted password with fixed length will follow. encrypted-password -- An MD5 encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password if you re-enter this mode. 18