TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 432

authentication. The community name can limit access to the SNMP agent from SNMP network management station, functioning as a password. Syntax snmp-server community name { read-only | read-write } mib-view no snmp-server community name Parameter name -- Community Name, ranging from 1 to 16 characters. read-only | read-write -- The access rights of the community, with read-only and read-write options. mib-view -- The MIB View for the community to access. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Add community public, and the community has read-write management right to View viewDefault: Switch(config)# snmp-server community public read-write viewDefault 49.6 snmp-server host Description The snmp-server host command is used to add Notification. To delete the corresponding Notification, please use no snmp-server host command. Syntax snmp-server host ip udp-port user-name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ type { trap | inform }] [ retries retries ] [ timeout timeout ] no snmp-server host ip user-name Parameter ip -- The IP Address of the management Host. Both IPv4 and IPv6 addresses are supported, for example 192.168.0.100 or fe80::1234. udp-port -- UDP port, which is used to send notifications. The UDP port functions with the IP address for the notification sending. It ranges from 1 to 65535. 411