TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 282

Example Map DSCP Priority 5 to 802.1p priority 2: Switch(config)#qos dscp-map 5 2 28.6 qos dscp-remap Description The qos dscp-remap command is used to configure the DSCP to DSCP mappings. To return to the default configuration, please use no qos dscp-remap command. When DSCP remap is configured, the packets with the specific DSCP priority will be changed to the desired new DSCP priority. Syntax qos queue dscp-map { dscp-value-list } { dscp-remap-value } no qos queue dscp-map Parameter Dscp-value-list --The original DSCP value list in the format of "1-3,5,7". The valid values are from 0 to 63. Dscp-remap-value-- The new DSCP value, which ranges from 0 to 63. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Map DSCP values 10-12 to DSCP value 2: Switch(config)# qos dscp-remap 10-12 2 28.7 qos queue mode Description The qos queue mode command is used to configure the Scheduler Mode. When the network is congested, the program that many packets complete for resources must be solved, usually in the way of queue scheduling. The switch will control the forwarding sequence of the packets according to the priority 261