TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 156

17.24 show ip igmp snooping groups Description The show ip igmp snooping groups command is used to display the information of all IGMP snooping groups. It can be extended to some other commands to display the dynamic and static multicast information of a selected VLAN. Syntax show ip igmp snooping groups [ vlan { vlan-id } ] [ multicast_addr | count | dynamic | dynamic count | static | static count ] Parameter vlan-id --The VLAN ID selected to display the information of all multicast items. multicast_addr -- IP address of the multicast group. count-- The numbers of all multicast groups. dynamic-- Display dynamic multicast groups. dynamic count-- The numbers of all dynamic multicast groups. static-- Display static multicast groups. static count-- The numbers of all static multicast groups. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the information of all IGMP snooping groups: Switch#show ip igmp snooping groups Display all the multicast entries in VLAN 5: Switch(config)#show ip igmp snooping groups vlan 5 Display the count of multicast entries in VLAN 5: Switch(config)#show ip igmp snooping groups vlan 5 count Display the dynamic multicast groups of VLAN 5 Switch(config)#show ip igmp snooping groups vlan 5 dynamic Display the static multicast groups of VLAN 5 135