TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 382

Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure a policy for rule 1 of ACL 6: specify the DSCP region as 30 and local priority 2 for the packets matching this rule: Switch(config)#access-list action 6 rule 1 Switch(config-action)# qos-remark dscp 30 priority 2 40.12 access bind Description The access-list policy name command is used to add Policy. To delete the corresponding Policy, please use no access-list policy name command. A Policy is used to control the data packets those match the corresponding ACL rules. Syntax access-list bind acl-id-or-name interface { [ vlan vlan-list ] | [ fastEthernet port-list ] | [gigabitEthernet port-list ] | [ ten-gigabitEthernet port-list ] } no access-list bind acl-id-or-name interface { [ vlan vlan-list ] | [ fastEthernet port-list ] | [gigabitEthernet port-list ] | [ ten-gigabitEthernet port-list ] } Parameter acl-id-or-name -- Enter the ID or name of the ACL that you want to add a rule for. vlan-list -- Specify the ID or the ID list of the VLAN(s) that you want to bind the ACL to. The valid values are from 1 to 4094, for example, 2-3,5. port-list -- Specify the number or the list of the Ethernet port that you want to bind the ACL to. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. 361