TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 346

Example Configure the enable authentication method list on the HTTP access as "list2": Switch(config)# ip http enable authentication list2 36.22 show aaa global Description This show aaa global command is used to display global status of AAA function and the login/enable method lists of different application modules: telnet, ssh and HTTP. Syntax show aaa global Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Display the AAA function's global status and each application's method list: Switch(config)# show aaa global 36.23 enable admin password Description The enable admin password command is used to set or change the Enable password for users to change the access level to admin. To remove the Enable password, please use no enable admin command. This command uses the symmetric encryption. Syntax enable admin password { [ 0 ] password | 7 encrypted-password } no enable admin 325