TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 370

Chapter 40 ACL Commands ACL (Access Control List) is used to filter data packets by configuring a series of match conditions, operations and time ranges. It provides a flexible and secured access control policy and facilitates you to control the network security. 40.1 access-list create Description The access-list create command is used to create an ACL. Syntax access-list create acl-id [ name acl-name ] no access-list create { acl-id } Parameter acl-id --Enter an ACL ID. The IDs for MAC ACL are from 0 to 499. The IDs for IP ACL are from 500 to 999. The IDs for Combined ACL are from 1000 to 1499. The IDs for IPv6 ACL are from 1500 to 1999. acl-name -- Enter a name to identify the ACL. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Create an IP ACL whose ID is 523: Switch(config)# access-list create 523 40.2 access-list resequence Description The access-list resequence command is used to resequence the rules by providing a Start Rule ID and Step value. 349