TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 371

Syntax access-list resequence acl-id-or-name start start-rule-id step rule-id-step-value Parameter acl-id-or-name -- The ACL ID or name. start-rule-id -- The start rule ID. rule-id-step-value -- The step value. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Resequence the rules of ACL 12 with the start ID as 1 and step value as 5: Switch(config)# access-list resequence 12 start 1 step 5 40.3 access-list mac Description The access-list mac command is used to create MAC ACL. To delete the MAC ACL, please use no access-list mac. Syntax access-list mac acl-id-or-name rule { auto | rule-id } { deny | permit } logging {enable | disable} [smac source-mac smask source-mac-mask ] [dmac destination-mac dmask destination-mac-mask ] [type ether-type] [pri dot1p-priority] [vid vlan-id] [tseg time-range-name] no access-list mac acl-id-or-name rule rule-id Parameter acl-id-or-name -- Enter the ID or name of the ACL that you want to add a rule for. auto -- The rule ID will be assigned automatically and the interval between rule IDs is 5. rule-id -- Assign an ID to the rule. 350