Yamaha CL3 Cl Editor Owner's Manual - Page 29
EQ EQUALIZER, LIBRARY, EQ graph, FREQ FREQUENCY, HIGH shelving, LPF Low Pass Filter, LOW shelving
View all Yamaha CL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
❏ EQ (EQUALIZER) 4 7 8 12 3 5 6 9 0 A 1 LIBRARY Accesses the INPUT EQ page of the Library window. 2 ON Switches the EQ (Parametric Equalizer) on/off of the currently selected channel. 3 EQ graph Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down the (< >) key of your computer keyboard and click the graph (The HPF setting will remain.) 4Q These knobs adjust the Q level of the frequency range selected in the EQ graph. 5 FREQ (FREQUENCY) These knobs adjust the center frequency for the four bands LOW, LO-MID, HI-MID, and HIGH. 6 GAIN These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID, and HIGH. 7 HIGH shelving If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear.) 8 LPF (Low Pass Filter) If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear, and the GAIN knob will act as the low pass filter on/off switch. 9 LOW shelving If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear.) 0 TYPE I/TYPE II (EQ type) Selects either TYPE I or TYPE II as the EQ type. A ATT (Attenuation) Adjusts the amount of attenuation for the signal level of pre EQ. 29 CL Editor Owner's Manual