Yamaha CL3 Cl Editor Owner's Manual - Page 59
Module graphic, Input meter/Output meter, Output patch, BYPASS, CH 1-72, STIN1L-STIN8R, INS CH 1-72
View all Yamaha CL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3 Module graphic This area shows a graphic of the effect module or the GEQ module that is currently assigned to the rack, and the parameters of that module. Double-click this to open the module editor for that rack unit. By holding down the (< >) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window of the CL itself. 4 Input meter/Output meter These indicate the level of the signals being input and output from the effect module or the GEQ module. 5 Output patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R output channels of the internal effect. NONE No assignment CH 1-72(*) INPUT CH 1-72(*) STIN1L-STIN8R ST IN channel 1-8 (L/R) INS CH 1-72(*) INPUT CH 1-72(*) insert in INS MIX 1-24 MIX channel 1-24 insert in INS MTRX1-8 MATRIX channel 1-8 insert in INS ST L, INS ST R, INS M(C) Insert-in of STEREO channel L/R or the MONO channel (*) CL3: 1-64, CL1: 1-48 6 BYPASS This switches the effect module or the GEQ module between active and bypassed states. An effect module is active when the BYPASS button is dark. 59 CL Editor Owner's Manual