Yamaha CL3 Cl Editor Owner's Manual - Page 35

DIRECT OUT except for ST IN channels, RECALL SAFE/MUTE SAFE, HA HA analog gain, 48V Phantom power

Get Yamaha CL3 PDF manuals and user guides View all Yamaha CL3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

5 HA (HA analog gain) Adjusts the analog gain for OMNI IN. This knob appears only if you select OMNI as INSERT IN (3). 6 48V (Phantom power) Switches phantom power (+48V) on/off. This button appears only if you select OMNI as INSERT IN (3). ❏ DIRECT OUT (except for ST IN channels) 1 2 3 4 1 ON Turns the direct output on/off. You can right-click the button to display a popup menu and select ALL ON or ALL OFF. 2 DIRECT OUT GAIN Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set this to the nominal value (0.0 dB) by holding down the (< >) key and clicking the knob. 3 DIRECT OUT PORT Click this to select one of the following output ports as the one used for direct out. NONE DANTE 1-DANTE 64 No assignment DANTE OUTPUT 1-64 OMNI 1-OMNI 8 REC L, REC R SLOT1-1, SLOT1-2...SLOT3-16 OMNI OUT jacks 1-8 L/R inputs of RECORDER Output channels of an I/O card installed in slots 1-3 4 DIRECT OUT POINT Selects the position at which direct out will be patched. Choose from PRE HPF, PRE EQ, PRE FADER, or POST ON. ❏ RECALL SAFE/MUTE SAFE These enable/disable Recall Safe and Mute Safe for the channel. 35 CL Editor Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
CL Editor Owner’s Manual
35
5
HA (HA analog gain)
Adjusts the analog gain for OMNI IN. This knob appears only if you select OMNI as INSERT IN (
3
).
6
48V (Phantom power)
Switches phantom power (+48V) on/off. This button appears only if you select OMNI as INSERT IN (
3
).
❏
DIRECT OUT (except for ST IN channels)
1
ON
Turns the direct output on/off. You can right-click the button to display a popup menu and select ALL ON or ALL OFF.
2
DIRECT OUT GAIN
Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set this
to the nominal value (0.0 dB) by holding down the <Ctrl>(<
>) key and clicking the knob.
3
DIRECT OUT PORT
Click this to select one of the following output ports as the one used for direct out.
4
DIRECT OUT POINT
Selects the position at which direct out will be patched. Choose from PRE HPF, PRE EQ, PRE FADER, or POST ON.
❏
RECALL SAFE/MUTE SAFE
These enable/disable Recall Safe and Mute Safe for the channel.
NONE
No assignment
DANTE 1–DANTE 64
DANTE OUTPUT 1–64
OMNI 1–OMNI 8
OMNI OUT jacks 1–8
REC L, REC R
L/R inputs of RECORDER
SLOT1-1, SLOT1-2...SLOT3-16
Output channels of an I/O card installed in slots 1–3
1
2
3
4