Yamaha CLP-535 Owner's Manual - Page 102

Message List Some message display remains open. In this case, press the [EXIT] button to close message display. Message Access error Cannot be executed Change to Current Tempo Change to Current Voice Completed Completed Restart now Convert canceled Convert completed to USB/ USERFILES/ Convert to Audio Copy completed to USB/ USERFILES/ Copy completed to User Device busy Device removed Duplicate name Executing Factory set executing Memory Song excluded Factory set executing Memory Song included FactorySet Completed Restart Incompatible device Internal hardware error Last power off invalid Checking memory Maximum no. of devices exceeded Memory full Move completed to USB/ USERFILES/ Move completed to User Meaning The operation has failed. The following causes can be considered. If the following are not responsible, the file may be damaged. • The file operation is wrong. Follow the instructions in "Handling Song Files" (page 61) or "Backup"/ "Restore" (pages 94 - 95). • The connected USB flash memory is not compatible with this instrument. For information on compatible USB flash memory, see page 70. • The protected Song on which you attempted the operation is defective. The operation has failed. The following causes can be considered. Solve the causes, and try again. • The file operation you attempted cannot be executed to Preset Songs or an Audio Song. For information on the limitation of handling Song files, see page 61. • The Song file operation cannot be made to an empty Song file (page 51) or NoSong. NoSong: This is displayed when you select a folder which does not contain any Songs. This message indicates that you are applying the current tempo to the selected Song. This message indicates that you are changing the Voice of the Song with the current Voice. This message indicates that the operation is completed. Go on to the next step. Restore is completed. The instrument is automatically turned on again. This message appears when the convert operation is canceled. This message appears when the convert operation to the "USER FILES" folder on a USB flash memory is completed. This message appears during the convert operation. This message appears when the copy operation to the "USER FILES" folder on a USB flash memory is completed. This message appears when the copy operation to the "User" on this instrument is completed. The operation, such as converting to the Audio Song or Audio Song playback/recording, has failed. This message appears when you attempt to use a USB flash memory to which recording/deleting operations are repeated. Execute the Format operation after making sure there is no important data in the USB flash memory (page 92), and try again. This message appears when the USB flash memory is removed from the instrument. This message indicates that an identically named file already exists. Rename the file (page 66). The instrument is executing the operation. Wait until the message disappears, then go on to the next step. The default settings (except the Songs in the "User") have been restored (page 95). This message also appears if you press and hold down the C7 key and turn on the power to the instrument. The default settings (including the Songs in the "User") have been restored (page 95). Factory set is completed. The instrument is then restarted. This message appears when an incompatible USB flash memory is connected. Use a device whose compatibility has been confirmed by Yamaha (page 70). A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor. This message appears when the power is turned on after turning off the power while handling a Song file (page 61) or saving a backup file (page 94). The internal memory is being checked while this message appears. If the internal settings are damaged, they will be reset to the default settings. If the Songs in the "User" are damaged, they will be deleted. The number of devices exceed the limitation. Up to two USB devices can be connected simultaneously. For details, see page 70. Since the capacity and the number of files in the "User"/USB flash memory are full, the operation cannot be completed. Delete some Songs in the "User"/USB flash memory or move Songs to another USB flash memory, and try again. This message appears when the move operation to the "USER FILES" folder on a USB flash memory is completed. This message appears when the move operation to "User" on the instrument is completed. 102 CLP-585/575/545/535/565GP Owner's Manual