Yamaha CLP-535 Owner's Manual - Page 107

Assembling the Clavinova CLP-585 Assembly Remove all parts from the package and make sure you have all of the items. 1. Attach E and F to D. E 1-2 A Connector panel Foamed styrol pads Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. Position the pads so that they will not hide the connector panel on the bottom of A. B C D Bundled pedal cord inside The pedals are covered with vinyl covers when shipped from the factory. Before starting the assembly, please make sure to remove the cover from the damper pedal. E F 6 × 20 mm round head screws × 4 Cord holders × 2 6 × 20 mm flat head screws × 6 4 × 10 mm thin screws × 2 F D 1-1 1-1. Remove the twist tie from the folded pedal cord. Don't discard the twist tie, you'll need it later in step 6. 1-2. While pushing the lower part of E and F from the outside, secure D using four 6 × 20 mm round head screws. 2. Attach B. Proper way to hold B F D 2-1 B 2-2 E 4 × 14 mm round head screws × 10 Headphone hanger Power cord 2-2 2-1. Insert B between E and F as shown in the illustration. 107 CLP-585/575/545/535/565GP Owner's Manual