Yamaha CLP-535 Owner's Manual - Page 114

Assembling the Clavinova CLP-545/535 Assembly 1. Attach C to D and E. Remove all parts from the package and make sure you have all of the items. 1-2 A 1-2 E C Foamed styrol pads Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. Position the pads so that they will not hide the connectors on the bottom of A. B C Bundled pedal cord inside D E 6 × 20 mm thick screws × 10 4 × 12 mm thin screws × 2 Cord holders × 2 4 × 10 mm thin screws × 2 4 × 20 mm tapping screws × 4 Headphone hanger D 1-2 1-1 1-1. Untie and straighten out the bundled pedal cord. Do not discard the vinyl tie. You will need it later in step 5. 1-2. Insert the protrusions into the holes on the brackets, then attach D and E to C by tightening the four thick screws (6 × 20 mm). 2. Attach B. Depending on the model of digital piano you purchased, the surface color of one side of B may be different from the other side. If so, position B so that the side similar in color to D and E faces the player. 2-1, 2-3 B E D Power cord 2-2 114 CLP-585/575/545/535/565GP Owner's Manual