Yamaha CLP-535 Owner's Manual - Page 109

5. Connect the speaker cord. Assembling the Clavinova Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. 7. Insert the plug of the power cord into the power connector. 5-1. Remove the twist tie attaching the speaker cord. 5-2. Insert the speaker cord plug into the connector so that the tab extends toward the front when viewed from the rear. 6. Connect the pedal cord. 6-2 6-1 6-3 6-1. Insert the pedal cord plug into the [PEDAL] connector. 6-2. Attach the cord holders to the instrument, then clip the cord into the holders. At this time, be careful that the pedal cord isn't loose between the plug and cord holder. 6-3. Use a twist tie to bundle the pedal cord. For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC IN and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. WARNING An improper voltage setting can cause serious damage to the instrument or result in improper operation. 109 CLP-585/575/545/535/565GP Owner's Manual