Yamaha RY20 Owner's Manual - Page 110
Changing the Effects
View all Yamaha RY20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Changing the Effects 10 Changing the Effects The RY20 contains a built-in DSP that is capable of a wide variety of reverb and delay effects. s Enabling Effects EFFECT If you have a rack of reverbs, delays, and other effects devices, you may want to use just the drum sounds of the RY20. The first display page of the Effect Mode allows you to quickly and conveniently bypass the DSP effects, switching from a "wet" sound to a "dry" sound. 1 Put the RY20 in Effect Mode by pressing the [EFFECT] button. Notice that the "EFFECT" indicator is switched on as is the "EFFECT" prompt and that the current setting is flashing. PATTERN OTHERS HH SD BD PAD BANK A EFFECT CHASE + -1 +1 102 MAIN A NOTE From the initial display page of the Effect Mode, pressing the [EFFECT] button will switch the RY20 back to the previously selected main mode, such as Pattern or Song Play Mode or one of the recording modes. From the other display pages of the Effect Mode, pressing the [EFFECT] button will switch to the initial display page of the mode. 2 Switch from effect "ON" to effect "BYPAS" (bypass) by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. The RY20 is shipped with the Effect Mode "ON". This setting applies to all the Drum Kits.