Yamaha RY20 Owner's Manual - Page 112

Changing the Effects s Send Level PAGE - PAGE + The send level is the amount of signal being sent to the DSP for processing. It is set for each individual drum pad. 1 Select the Send Level display page by pressing the [ PAGE+ ] or [ PAGE- ] button. The current level flashes under the "SNDLVL" prompt. PATTERN OTHERS HH SD BD PAD BANK A EFFECT CHASE MAIN A DRUM KIT PAD 2 Press the pad you want to modify. HINT You can also select another drum kit or pad by changing the focus area with the [ > ] cursor button, then selecting a drum kit or pad by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. 3 Set the send level by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. The range is from "0" to "7". A level of "7" is the maximum signal level and a level of "0" sends no signal to the DSP. NOTE You can change the Send Level for the individual pads of the preset drum kits. Your altered settings will stay in effect until you select another drum kit. 104