Yamaha RY20 Owner's Manual - Page 25

Playing the Preset Patterns • FILL BA - This section is used to make the transition back to the verse/chorus section from the bridge section. When it has completed playing, it switches to "MAIN A". There is also a finale section: • ENDING - As its name implies, this section ends the pattern play when it is complete. NOTE When the "ENDING" section has completed, it stops the playback and sets the RY20 back to "MAIN A" to prepare for playing the next pattern. You can select a section before you start playing a pattern. For example, select the "INTRO" section of the pattern. After you have started the pattern playing, you can select other sections. NOTE When you select a section other than the two transition sections, the newly selected section will begin playing after the current section has finished playing. 1 Press and hold the [SECTION] button, then press the Drum Pad button for the section you want to play. The appropriate Section indicator lights up, for example, the "INTRO" indicator. There are labels below the lower row of drum pads indicating the different sections. SECTION 6 BD INTRO 6 BD INTRO 7 SD MAIN A 8 SIDE STICK MAIN B 9 HH PEDAL FILL AB 10 HH CLOSED FILL BA 11 CRASH ENDING 2 Start playing the pattern by pressing the [ PLAY ] button. The green Play LED will flash to the current tempo setting and the pattern will begin playback. The "INTRO" section plays, automatically followed by the "MAIN A" section. 3 Select another section. For example, select the "MAIN B" section. Press and hold the [SECTION] button. Then press the [8 - SIDE STICK] drum pad button, which corresponds to the "MAIN B" section. SECTION 8 SIDE STICK MAIN B 17