Yamaha RY20 Owner's Manual - Page 116

Changing the Effects s Delay Time PAGE - PAGE + In this mode, you can adjust the right and left channel delays. 1 Select the Delay Time display page by pressing the [ PAGE+ ] or [ PAGE- ] button. The current levels are displayed under the "D.TIME" prompt with the left channel level flashing. PATTERN OTHERS HH SD BD PAD BANK A EFFECT CHASE DRUM KIT MAIN A NOTE As with feedback gain, the delay time setting can only be applied to the delay effects. When the reverberation effects are selected, "-- --" is displayed. 2 Set the left channel delay time by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. For the delays "DELY1" and "DELY2", the range is "00" to "99". These settings change the length of the delay loop for each channel. A low value sets a short loop while a high value sets a long loop. The other two delays, "DELY3" and "DELY4", use synchronized delays: T0 Sets a 32nd note triplet delay. 3 T1 Sets a 32nd note delay. T2 Sets a 16th note triplet delay. 3 T3 Sets a 16th note delay. T4 Sets an eighth note triplet delay. 3 T5 Sets an eighth note delay. 3 Change the focus to the right channel delay time by pressing the [ > ] cursor button. Set its value by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. 108