Yamaha RY20 Owner's Manual - Page 54
Changing the Meter
View all Yamaha RY20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Recording a User Pattern 2 Change the value by rotating the Jog Dial or using the [ +1 ] and [ -1 ] buttons. The range is from "004" to "508". The gate value applies only to the current position within the pattern. Select another position in the pattern. Press the [ PAGE- ] button to return to Pattern Record Mode. Use the [FORWARD] or [BACKWARD] button to select a new position. Then repeat the preceding two steps. NOTE You can only change the gate value for a pattern position that has data in it. If there is no data at a position in the pattern, the gate value is "---". s Changing the Meter PAGE - PAGE + Before you record data into a pattern, you can adjust the time signature and the number of measures. 1 Select the Meter display page by pressing the [ PAGE+ ] button. The display indicates "METER" and the current time signature flashes. PATTERN OTHERS HH SD BD PAD BANK A CHASE MEASURE MAIN A 2 Set the time signature by rotating the Jog Dial or using the [ +1 ] and [ -1 ] buttons. The default time signature is "4/4". The range of time signatures is from "1/4" to "8/4", "1/8" to "16/8", and "1/16" to "32/16". 46