Yamaha RY20 Owner's Manual - Page 123

MIDI Note Numbers 1 Select the Note Number display page by pressing the [PAGE+] or [PAGE-] button. The current note number flashes next to the "NT" prompt. PATTERN OTHERS HH SD BD MIDI PAD BANK A CHASE MIDI Functions PAGE - PAGE + PAD MAIN A 2 Press the drum pad you want to modify. 3 Change the MIDI note number of the current pad by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. For the drum pads from "000" to "059" (the drum voices) you can assign an individual MIDI note number in the range of "000" to "127" or "OFF". For the drum pads from "060" to "119" (the bass voices) you can assign a MIDI note number in the range of "000" to "127". However, all the note numbers will be affected by the change. (The note number range depends on which pad you select.) NOTE You can use Pad Bank Mode to select another group of drum pads. See page 84 for instructions regarding Pad Bank Mode. An alternative method is to press the [ > ] cursor button to change the focus to the pad prompt (the "PAD" indicator starts flashing). Select a pad with the Jog Dial or by using the [ +1 ] and [ -1 ] buttons, then press the [ < ] cursor button to change the focus back to the note assignment. NOTE If you are modifying the drum voices and did not select one of the user tables with the previous display page, you will see the error message "PRESET" when you attempt to modify the table. The preset table contains the mapping for General MIDI drum voices and cannot be changed. However, if you are modifying the bass voice, you can change the value of the preset table. 115