Yamaha RY20 Owner's Manual - Page 62

Other Pattern Functions s Velocity Modify PAGE - PAGE + You can modify the velocity settings for an entire track. This function allows you to change the rate of velocity and the offset from the recorded values. 1 Press the [PATTERN] button to put the RY20 into Pattern Mode. Select a pattern by rotating the Jog Dial or using the [ +1 ] and [ -1 ] buttons. 2 Select Velocity display page by pressing the [PAGE+] button until the display indicates "VELCTY" and the current rate flashes. Also notice that one of the track " " indicators is lit. PATTERN OTHERS HH SD BD PAD BANK A CHASE LEVEL MAIN A OTHERS TRACK HH SELECT/ MUTE SD BD 3 Select the track you wish to modify with the Track Select/Mute buttons. When you press a button, the track " " indicator for the current track switches off as the indicator corresponding to the selected track lights up. PATTERN PAD BANK A CHASE OTHERS HH SD BD 4 Alter the velocity rate by rotating the Jog Dial or using the [ +1 ] and [ -1 ] buttons. The default rate is "100%" which is the normal setting. The range is from "000%" to "200%". As you lower the rate below "100%", all of the velocity settings are correspondingly reduced. When you raise the rate above "100%", the velocity settings are correspondingly increased. 5 Change the focus to the "LEVEL" prompt using the [ > ] cursor button. 54