Yamaha RY20 Owner's Manual - Page 55
Adjusting the Click - user guide
View all Yamaha RY20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Recording a User Pattern 3 Set the number of measures by using the [ > ] cursor button to change the focus to the "MEASURE" prompt. Change the number of measures by rotating the Jog Dial or using the [ +1 ] and [ -1 ] buttons. The default length is "02" measures. The range is "01" measure to "16" measures. NOTE The meter and number of measures in a pattern that contains data cannot be changed. If you try to change these values, the message "NOT EMPTY" will momentarily appear on the display. s Adjusting the Click The RY20 has a built-in click sound which sounds on each beat of the measure to serve as a rhythmic guide when you record in Real-time Mode. You can change both the volume and the quantization of the click sound. 1 Select the Click display page by pressing the [ PAGE+ ] button until the display indicates "CLICK". PATTERN OTHERS HH SD BD PAD BANK A CHASE LEVEL QUANTIZE PAGE - PAGE + MAIN A 2 Set the volume by rotating the Jog Dial or using the [ +1 ] and [ -1 ] buttons. The default volume level is "15". The range is from "00" to "15". NOTE Pressing the [ +1 ] and [ -1 ] buttons simultaneously resets the level to "00". 47