Yamaha RY20 Owner's Manual - Page 92

Modifying the Drum Kits PAD BANK Select a Pad Bank 1 Press the [PAD BANK] button to switch the RY20 to Pad Bank Mode. NOTE From the initial display page of Pad Bank Mode, pressing the [PAD BANK] button will switch the RY20 back to the previously selected main mode, such as Pattern or Song Play Mode or one of the recording modes. 2 Select a Pad Bank from "A" to "E" by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. PATTERN OTHERS HH SD BD PAD BANK A CHASE PAGE - PAGE + 84 MAIN A NOTE The selected Pad Bank indicator will be shown at the top of the display. PAD BANK C CHASE You can also select the Bass Pad Bank. With the RY20 in Pad Bank Mode, press the [PAGE+] button to access the Type display page. Change the type from "DRUM" to "BASS" by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. NOTE When you switch the RY20 to "BASS", the Pad Bank indicator also changes. PAD BANK BASS CHASE Press the [PAGE-] button to select the octave. The display shows the current octave range. Select an octave range from "OCT-2" to "OCT+2" by rotating the Jog Dial or by using the [ +1 ] and [ -1 ] buttons. IMPORTANT If you change any of the following drum kit parameters on a drum pad, it is changed for all the pads in the Bass Pad Bank.