3Com 3107c User Guide - Page 114

Installing the Base Unit on the Wall, firmly seated.

Page 114 highlights

114 APPENDIX A: TELEPHONE INSTALLATION AND MAINTENANCE Installing the Base Unit on the Wall 1 Insert two mounting screws into the wall 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the phone. 2 Plug the AC adapter into the base unit. 3 Place the AC adapter cord inside the molded channel on the bottom of the wall mount stand. 3/16 in. 3-15/16 in. 4 Plug one end of the RJ45 cable into the jack on back of the base unit. Then place the cable inside the molded channel on the bottom of the wall mount stand. 5 Place the base unit on the posts of the wall screws and push down until it is firmly seated. 6 Plug the free end of the RJ45 cable into the LAN, as specified by your NBX Administrator. 7 Plug the AC adapter into a standard 120V AC wall outlet. 3/16 in. 3-15/16 in. Do not use an outlet controlled by a wall switch.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138

114
A
PPENDIX
A: T
ELEPHONE
I
NSTALLATION
AND
M
AINTENANCE
Installing the Base
Unit on the Wall
1
Insert two mounting screws into the wall 3-15/16
inches apart. Allow about 3/16 of an inch between the
wall and screw heads for mounting the phone.
2
Plug the AC adapter into the base unit.
3
Place the AC adapter cord inside the molded channel
on the bottom of the wall mount stand.
4
Plug one end of the RJ45 cable into the jack on back
of the base unit. Then place the cable inside the
molded channel on the bottom of the wall mount
stand.
5
Place the base unit on the posts of the
wall screws and push down until it is
firmly seated.
6
Plug the free end of the RJ45 cable into
the LAN, as specified by your NBX
Administrator.
7
Plug the AC adapter into a standard
120V AC wall outlet.
Do not use an outlet controlled by a wall switch.
3/16 in.
3-15/16 in.
3-15/16 in.
3/16 in.