3Com 3107c User Guide - Page 30

30 CHAPTER 2: 3COM 3106C AND 3107C CORDLESS TELEPHONES Or, depending on the condition, you may see one of the following display messages: LCD Display NO SERVICE or Connect to the phone port LINE IN USE NO SERVICE Condition Indicator No LAN connection or no power Error Tone to the base unit Line in use Handset at the phone's range limit Error Tone Error Tone Answering a Call When you receive a call, the handset rings and the display shows the calling phone's ID (if Caller ID is enabled). Handset in the Charging Unit Handset Out of Charging Unit Remove the handset from the charging Press the Talk button. unit. The AutoTalk feature allows you to answer the call immediately. When you finish the call, place the handset back in the charging unit. AutoStandby automatically hangs up the phone. or Press the Talk button to hang up the phone. Making a Call 1 Press the Talk button. The Talk icon displays after the handset and base unit are connected, and you see the handset's current volume setting. Example: Volume Low. 2 When you hear a dial tone, enter the number that you want to call. Example: 18085551840. You see Invalid Number in the display panel if you enter a number that the phone does not recognize or cannot process. 3 When you finish the call, press the Talk button again to hang up the phone and put it in AutoStandby.