Acer AB460 F1 User Manual - Page 142
Configuration - Network Settings, by using DHCP Dynamic Host Configuration Protocol.
![]() |
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
122 3 Server Blades: Setup and Installation Configuration - Network Settings This feature allows you to configure network settings. When you click on the Network icon in the Options window (1), the following screen will display. Figure 3-76. Network Settings 2 13 4 5 6 7 8 9 1 Network: This item allows you to view or modify network settings. 2 MAC Address: Enter the MAC address for networking in the box. Check the first radio button to obtain an IP address automatically by using DHCP (Dynamic Host Configuration Protocol). Check the second radio button to use the IP address entered below. 3 IP address: If the second radio button above is checked, please enter your IP address in the box. 4 Subnet Mask: Enter the address for the subnet mask of your network. 5 Default Acer: Enter the IP address for the default gateway of your network. 6 Primary DNS Server: Enter the IP address of your primary domain name server. 7 Secondary DNS Server: Enter the IP address of your secondary domain name server. 8 Enable VLAN: Check this box to enable Virtual LAN support
![](/manual_guide/products/acer-computers-ab460-f1-user-manual-fb04b8f/142.png)