Acer AB460 F1 User Manual - Page 257
IDE Detect Timeout sec, Plug & Play OS Selecting: Yes, PCI Latency Timer, PCI IDE BusMaster
![]() |
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
237 disk drive support. • 32Bit Data Transfer - Select Enable to enable the function of 32-bit IDE data transfer. IDE Detect Timeout (sec): Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI devices installed in the system. PCI/PnP configuration Figure 3-148. PCI/PnP configuration Plug & Play OS Selecting: Yes allows the OS to configure Plug & Play devices. (This is not required for system boot if your system has an oerating system that supports Plug & Play.) Select No to allow the BIOS to configure all devices in the system. PCI Latency Timer: This feature sets the latency timer of each PCI device installed on a PCI bus. PCI IDE BusMaster: When Enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives. Onboard NIC Option ROM : Select iSCSI to use the iSCSI Option ROM to boot the computing using a network device. Select PXE to use the PXE Option ROM to boot the computer using a network device.
![](/manual_guide/products/acer-computers-ab460-f1-user-manual-fb04b8f/257.png)