Acer AB460 F1 User Manual - Page 495

475 Parameter Description Index This parameter specifies the port index. Alignment Errors This parameter specifies the number of alignment errors. Alighment errors generally indicate improper byte-alignment for Ethernet packets. FCS Errors This parameter specifies the number of packets received with checksum errors. Single Collision Frames This parameter specifies the number of frames received with a collision. Multiple Collision Frames This parameter specifies the number of frames received with multiple collisions. SQE Test Errors This parameter specifies the number of Signal Quality Errors that have occurred. Deferred Transmissions This parameter specifies the number of frames deferred for transmissions due to network sense. Late Collisions This parameter specifies the number of frames faced late collisions. A collision is considered late if the jam occurs after 512 bit-times, or 64 bytes. Excess Collisions This parameter specifies the number of excess collisions detected. Excessive Collisions describe the situation where a station has tried 16 times to transmit without success and discards the frame. This means that there is excessive traffic on the network and this must be reduced. Transmitted This parameter specifies the number of MAC transmit Internal MAC Errors errors. Carrier Sense Errors This parameter specifies the number of carrier sense errors. Frame Too Long This parameter specifies the number of too long frames received for transmission. Received Internal MAC Errors This parameter specifies the number of MAC received errors.