Acer AB460 F1 User Manual - Page 79

59 Item 7 8 9 10 11 12 13 14 15 Name Description Secondary DNS Server IP Address Enter the IP address of the Secondary Domain Name Server in the box. It will be used when the Primary DNS Server cannot be contacted. Remote Console & HTTPS Port Enter the port numbers the remote host and the HTTP server are listening. If a number is not entered in the box, the default value will be used. HTTP Port Enter the port number the of the HTTP server. If a number is not entered in the box, the default value will be used. SSH Port Enter the port number of the SSH server. If a number is not entered in the box, the default value will be used. Bandwidth Limit Enter the maximum bandwidth value for network interfacing. The value should be in Kbits per second. Enable SSH Access Click this box to enable SSH access. Disable Setup Protocol Check this box to disable the setup protocol function of the Ethernet switch module. LAN Interface Speed Click on the arrow on the right to select a desired LAN interface speed from the pull-down menu. The options are Auto-detect, 10 Mbps or 100 Mbps. If Auto-detect is selected, the optimized speed will be set based on the system configurations detected by the OS. LAN Interface Duplex Mode Click on the arrow on the right to select a desired LAN interface duplex mode from the pull-down menu. The options are AUTO-DETECT, HALF DUPLEX and FULL DUPLEX. If Auto-detect is selected, the LAN INTERFACE DUPLEX MODE will be set to the optimized setting based on the system configurations detected by the OS.