Acer AB460 F1 User Manual - Page 240
BIOS Updates, Flashing BIOS, Flashing a BIOS using the KVM Dongle
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
220 3 Server Blades: Setup and Installation BIOS Updates It may be necessary to update the BIOS used in the blade modules on occasion. However, it is recommended that you not update BIOS if you are not experiencing problems with a blade module. There are several methods you may use to upgrade (flash) your BIOS. After downloading the appropriate BIOS file (in a zip file format), follow one of the methods described below to flash the new BIOS. Flashing BIOS Use the procedures below to "Flash" your BIOS with a new update using the KVM dongle, USB ports on the CMM module or by use of a Floppy disk. Flashing a BIOS using the KVM Dongle: For this method, you must use a KVM cable (included with the system). 1. Copy the contents of the zip file to a bootable USB pen drive. 2. Connect the KVM cable to the KVM connector at the front of the blade you will be flashing the BIOS to. 3. Connect your bootable USB pen drive to one of the two USB slots on the KVM dongle. 4. Boot to the USB pen drive and go to the directory where you saved the contents of the zip file. 5. Type flash filename.rom (replace filename.rom by the actual ROM file name). Flashing a BIOS using the USB Ports on the CMM: 1. Copy the contents of the zip file to a bootable USB pen drive. 2. Connect your bootable USB pen drive to one of the two USB slots on the CMM (located on the back side of the enclosure). 3. Boot to the USB pen drive and go to the directory where you saved the contents of the zip file. 4. Type flash filename.rom (replace filename.rom by the actual ROM file name).