Acer AB460 F1 User Manual - Page 332

312 4 Networking Switch Modules Clicking the TARGET ADDRESS tab brings up the SNMP TARGET ADDRESS SETTINGS page, which configures SNMP target address parameters. The parameters for this page are shown in the following table. Parameter Target Name Target IP Address Target Timeout Target Retries Transport Tag Param Storage Type Description This parameter specifies a TARGET NAME as a unique identifier. The TARGET IP ADDRESS specifies a target address to be used in the generation of SNMP operations. TARGET TIMEOUT specifies the maximum round trip for communicating with the TARGET IP ADDRESS. TARGET RETRIES specifies the number of attempts to be made when no response is received The TRANSPORT TAG value is used to select a target address for a particular operation. PARAM contains SNMP parameters to be used when generating messages to be sent to a transport address. Use this parameter to specify whether the STORAGE TYPE is volatile or non-volatile.