Acer AB460 F1 User Manual - Page 453

433 Clicking the LOCAL PREF tab brings up the BGP LOCAL PREFERENCE CONFIGURATION page, which allows you to configure the Local Preference value for routes. The parameters for this page are shown in the following table. Parameter Description Local Preference ID This parameter specifies the Local Preference ID, which is the index for this table. Remote AS This parameter specifies the AS number from which the route update is received. IP Address Prefix This parameter specifies the IP Address prefix for which the update is received. IP Address Prefix Length This parameter is used to calculate the subnet. Intermediate AS This parameter represents the intermediate AS between the BGP peers. Direction This parameter can be set for the incoming or the outgoing packets using In and Out values. Value This parameter specifies the Local preference value to be associated with this learnt path. Preference This parameter is used to enable/disable filtering. Status This parameter specifies the status of the entry.