Acer AB460 F1 User Manual - Page 41
Configuring the CMM, Con the Computer
![]() |
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
21 Removing the Module: 1. Pull out the release handle to the open position. 2. Pull the module out of the bay. 3. Replace immediately with another module or with a dummy module cover to maintain airflow integrity. Configuring the CMM To access/configure the CMM, you first have to configure the IP settings of the CMM depending on you network environment. The below procedure for this configuration just serves as a reference for getting the CMM setup. If your system has Linux OS, please follow similar instructions to get the CMM setup. Requirements are: • Computer system with LAN (RJ45) port • RJ -45 Ethernet cable The default IP of the CMM is 192.168.100.100. Configure the Computer system (connected through Ethernet-LAN to the CMM) to the same address range (for example 192.168.100.101). Configuring the CMM in Windows OS: 1. Go to START CONTROL PANEL NETWORK CONNECTIONS 2. Right-click on LAN to view properties.
![](/manual_guide/products/acer-computers-ab460-f1-user-manual-fb04b8f/41.png)