Acer AB460 F1 User Manual - Page 35
Slide the rails apart far enough to match the depth of the rack.
![]() |
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
15 Installing an enclosure: 1. Decide where you want to place the blade enclosure into the rack (see "Rack Mounting Considerations" in the previous section). 2. Position the Enclosure Template at the front of the enclosure to determine the locations of the screws for the enclosure rails (see Figure 2-5). Figure 2-5. Positioning the Enclosure Template 3. The two enclosure rail sections are screwed together to keep them immobile during shipping. Release these screws just enough to allow the rails to slide apart. Note the arrow on the rail, which indicates the end that attaches to the front of the rack. 4. Slide the rails apart far enough to match the depth of the rack. Position the rails with the template and secure the front of each to the front of the rack with two flathead screws, then secure the back of each rail to the rear of the rack with two flathead screws (see Figure 2-6). Note that the rails are left/right specific and very heavy. Figure 2-6. Securing the Rails to the Rack
![](/manual_guide/products/acer-computers-ab460-f1-user-manual-fb04b8f/35.png)