Acer AB460 F1 User Manual - Page 225
LED Indicators, KVM Connector, See the Acer Smart Blade Console on for further details
![]() |
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
205 LED Indicators Blade module LEDs are described below in the following table. LED State Description Power LED Green Power On Amber Standby Red Power Failure1 KVM/ID Steady On Indicates that KVM has been initialized on this LED (Blue) blade module Flashing Serves as a ID indicator (the ID function is activated with a management program) Network LED (Green) Flashing Flashes on and off to indicate traffic (Tx and Rx data) on the LAN connection to this blade module. System Fault LED (Red) Steady On This LED illuminates red when a fatal error occurs. This may be the result of a memory error, a VGA error or any other fatal error that prevents the operating system from booting up. 1In the event of a power failure, the N+1 Redundant Power Supply (if included in your system's configuration) shares the system load to provide uninterrupted operation. The failed power supply should be replaced with a new one as soon as possible. KVM Connector Alternatively, you may connect a KVM cable (CBL-0218L, with a keyboard/video/mouse attached) to the KVM connector (#7) of the blade you wish to access. To switch to another blade, disconnect the cable then reconnect it to the new blade. See the Acer Smart Blade Console on page 28 for further details on using the KVM function remotely.
![](/manual_guide/products/acer-computers-ab460-f1-user-manual-fb04b8f/225.png)