Acer AB460 F1 User Manual - Page 457

437 Parameter Description Client to Client Reflection This parameter configures the Route Reflector to support route reflection to client peers. By default, the Route Reflector will reflect routes learnt from a client peer to all other client peers. If required, the administrator can disable this feature by disabling client-to-client reflection. If disabled, then the Route Reflector will not advertise routes learnt from a client peer to other client peers. This occurs when all peers within a cluster are fullymeshed and the client peer itself is able to advertise routes to other clients of the route-reflector. Dampening Half Life Time This parameter specifies the time (in seconds) after which a penalty is decreased by half. Once a route has been assigned a penalty, the penalty is decreased by half after the half-life time. Dampening Reuse If the penalty associated with a suppressed route falls Value below this value, the route is re-used. Dampening Suppress Value A route is suppressed when the penalty associated with the route exceeds this value. Dampening Max Suppress Time This parameter specifies the maximum time (in seconds) a route can be suppressed. Dampening Decay This parameter specifies the time granularity in Granularity seconds used to perform all decay computations. Dampening Reuse Granularity This parameter specifies the time interval between evaluations of the reuse-lists. Each reuse lists corresponds to an additional time increment. Dampening Reuse Array Size This parameter specifies the size of the reuse index arrays. This size determines the accuracy with which suppressed routes can be placed within the set of reuse lists, when suppressed for a long time. Confederation Identifier This parameter specifies the BGP confederation identifier. The possible values are between 1 to 65535. Configuring 0 removes the existing configuration.