Acer AB460 F1 User Manual - Page 361

341 Port Basic Settings Figure 4-218. Port Basic Settings Clicking the BASIC SETTINGS tab brings up the PORT BASIC SETTINGS page, which allows you to configure port status and mode information. This page also helps configuring priority and MTU. The parameters for this page are shown in the following table. Parameter Port Link status Admin State Default User Priority Switch Port Switch Port Mode Description This displays the port number. This column shows the physical link status as an UP or Down arrow. A green up arrow indicates that the status of the port is up, while the red down arrow indicates that the status of the port is down. This parameter allows you to administratively configure the admin state as Up or Down. This parameter allows you to set the priority from 0 to 7. By default all ports are switch ports for layer 2 switching. To configure a port as a layer 3 routed port, choose No. Use this control allows to set the access mode as either Trunk or Hybrid.