Acer AB460 F1 User Manual - Page 307

287 Management Security Basic Settings Figure 4-177. Management Security Basic Settings Clicking the MANAGEMENT SECURITY tab brings up the MANAGEMENT SECURITY BASIC SETTINGS page. This page allows you to setup the below listed basic security parameters see the following table. Parameter Description Authentication mode Use this parameter to choose the mode of authentication for management access. By default the management access is authenticated with LOCAL user accounts information. However you can choose to authenticate using Radius or TACACS instead. Authentication traps You can enable SNMP Traps for SNMP access authentication events using this parameter.. Administrative users can also create Enable Passwords in this page. Low privilege users can use these Enable Passwords in the WEB SETTINGS page to enable access to privilege configurations. Administrative users can set an Enable Password for all privilege levels. By default, the Enable Password is set only for the highest level (Level_15). This default password is the same as the default password set for the root user login.