Acer AB460 F1 User Manual - Page 565
to save the hardware information., Con the firmware image file name using the below
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
545 Hit any key to stop autoboot: 5 3. Once the boot sequence is interrupted, it will display menu options.Use the "H" option to set hardware information by typing the character H. This will display the hardware information that can be changed. 4. Configure the IP address for this switch (only for booting purposes) using the command: ip= For example ip=192.168.2.3 5. Configure the subnet mask for this switch IP address using the below command: mask= For example mask=255.255.255.0 6. Configure the TFTP server IP address using the below command: tftpaddr= For example tftpaddr=192.168.2.100 7. Configure the gateway address to reach the TFTP server using the below command if the TFTP server is in different network: gateway= For example gateway=192.168.2.100 8. Configure the firmware image file name using the below command: ramdiskname= For example ramdiskname= SBM-GEM-X2C-v5.2.10.bin 9. Type Save to save the hardware information. 10. Type Exit to exit the hardware information menu. 11. Type F to download the firmware image. In this case it will download to the normal image area. 12. On a successful download, the switch displays the below string. Updating the ramdisk image ... This may take awhile OK 13. After a successful download, boot the switch to use this latest firmware by typing J.