Acer AB460 F1 User Manual - Page 302

282 4 Networking Switch Modules Parameter Description Device Location Use this parameter to change the device location. PIM Mode Use this to configure the PIM status of the switch. Snoop forwarding You can use this parameter to change the Snoop Mode Fowarding Mode between MAC based and IP based. Switch Start MAC address This is a display for the Switch Start MAC address. Configuration Restore Status This is a display for the Configuration Restore Status Device Up Time This is a display for the Device Up Time. HTTP Server Status This is a display for the HTTP Server Status. HTTP Port Number This is a display for the HTTP Port Number. This page also has a control to Reset To Factory Defaults. This clears all switch configuration and local user accounts information. This reset requires reboot of the switch. Warning! Make sure to have all necessary configurations backed up before doing "Reset To Factory Defaults". This page also provides a control to Reboot the switch. In stacking, the Switch Identifier is displayed on top of this reboot button. You can select the interested stack member switch to reboot the corresponding switch. You can also select the ALL option to reboot all stack members.