Acer AB460 F1 User Manual - Page 278
Loading Adaptec Factory Default Setting, Creating an Adaptec RAID Volume
![]() |
View all Acer AB460 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
258 3 Server Blades: Setup and Installation Loading Adaptec Factory Default Setting Adaptec onboard SATA RAID utility does not provide an option for factory default setting. To reset onboard SATA RAID volume related configurations, please delete the existing onboard SATA RAID volumes. Creating an Adaptec RAID Volume 1 Select the Array Configuration Utility option. 2 Select Create Array. 3 The Select drives to create Array displays. 4 Select the required hard drive disk and then press INS to add it in Selected Drives area. 5 Press Enter to complete the selection. 6 Select Array Type. 7 Configure the array properties. 8 Press Done when finish. 9 Press Y when "Do you want to create an array? (Yes/No):" displays. 10 Press any key to continue. 11 Now the RAID volume is created, you can press ESC to exit. Initialing an Adaptec RAID Volume During Adaptec onboard SATA RAID volume creation process, the Adaptec onboard SATA RAID volume will be automatically initiated once the onboard SATA RAID volume has been created. Assigning an Adaptec Hot Spare Drive A hot spare is a hard disk drive that automatically replaces any failed drive in a RAID volume, and can subsequently be used to rebuild the RAID volume. 1 Select the Array Configuration Utility option. 2 Select Add/Delete Hotspare. 3 The Select drives to assign Spare displayed. 4 Select desired hard drive disk and then press INS to add it in Assigned Hotspare drives area. 5 Press Enter to complete the selection.
![](/manual_guide/products/acer-computers-ab460-f1-user-manual-fb04b8f/278.png)