Acer AB460 F1 User Manual - Page 36

16 2 Chassis Enclosure 5. (Optional step) Add the front left and right handles to the enclosure using five screws to secure each handle. Install a thumbscrew through the bottom hole of each handle (see Figure 2-7). Note: These handles are optional and need only be installed when mounting the system into a short rack. When mounting into a deep rack, they are unnecessary and regular screws should beused instead of thumbscrews. Be aware that these handles are not to be used for lifting the system, they are only to be used to slide the system within the rack. 6. With one person on either side (see the descriptive label on the side of the enclosure), lift the enclosure and slide it into the installed rails. Warning! Be sure that the enclosure is empty of all blades, power supplies, switches and management modules BEFORE lifting. These should be installed AFTER the enclosure is mounted in the rack. Injury and damage may occur if components are not removed from the rack prior to installation. 7. After pushing the enclosure all the way into the rack, use two roundhead screws on each side of the server to lock it into place. Figure 2-7. Attaching the Optional Handles 8. The enclosure is now securely installed in the rack (see Figure 2-8).