Acer AB460 F1 User Manual - Page 286

266 4 Networking Switch Modules Network Connection Use the procedure below to connect and login to the Acer Smart Blade Console. Logging In to the Acer Smart Blade Console: 1. Connect a PC to a network that is accessible to the switch. For example, connect a PC to any of the front panel ports of the switch and make sure the PC has an IP address on the same subnet as the switch management IP. 2. Type the IP address of the switch that you want to connect to in the address bar of your browser, and hit . Once the connection is made, the LOGIN screen displays Note: The default username is root and the default password is superuser. The Default IP address is 192.168.100.102. Address Defaults The following are the default addresses that are initially set. Afterwards, you can change these values within the program. Address Default Setting Default IP Address 192.168.100.102 Default Acer Address 192.168.100.1 Default Subnet Mask 255.255.255.0 Note: If two switches are installed in a AB7000 system, you will have to change the IP address of one from the default so that both switches have unique addresses. Acer Smart Blade Manager Use the procedure below to login to the Acer Smart Blade Manager.