Acer AB460 F1 User Manual - Page 396

376 Port Settings 4 Networking Switch Modules Clicking the PORT SETTINGS tab brings up the LA PORT SETTINGS page, which configures LA properties at a per-port level. The parameters for this page are shown in the following table. Parameter Port Port Priority Mode Port Channel Timeout Description This parameter specifies the Interface Index. This parameter specifies the priority value of the Port. This parameter specifies whether the Port LACP activity is Active or Passive. This parameter specifies the identifier of the port channel interface. This parameter sets the time within which LACP PDUs must be received on a port to avoid timing out of the Aggregated Link. If a Long timeout is chosen then the ports will time out of the Port Channel in 90-seconds. If a Short timeout is chosen then the ports will time out of the Port Channel in 3-seconds.